Yealink Forums

Hello.

with the following parameters we try to disable the forwarding for busy and no answer on a T56A, the setting has no effect.

forward.always.enable=1
forward.busy.enable=0
forward.no_answer.enable=0

Only the parameter

features.fwd.allow=0

works but all redirections will be switched off.

How to switch off the redirection for busy and no_answer on a Yealink T56A via Auto Provisioning ?

Thanks

(09-10-2018 07:47 PM)ReneYealink Wrote: [ -> ]Hello.

with the following parameters we try to disable the forwarding for busy and no answer on a T56A, the setting has no effect.

forward.always.enable=1
forward.busy.enable=0
forward.no_answer.enable=0

Only the parameter

features.fwd.allow=0

works but all redirections will be switched off.

How to switch off the redirection for busy and no_answer on a Yealink T56A via Auto Provisioning ?

Thanks

Hi,

Please make sure the parameter “features.fwd_mode” is set to 0 and do not forget to set a destination number configured by the parameter "forward.always.target"

Hope this will help.