Yealink Forums

Good day all,

We have an issue with the T42S YealinkBToEConnector for MAC. BToE is pairing and status is as follow: paired (unsigned). When pairing it is not prompting via S4B to enter credentials.

This is however working perfectly on Windows workstations via the Yealink BToE Connector for Lync(6.0.7.0).

Any advice would be greatly appreciated.

Regards.

Dear Frans,

​This is Evan from Yealink Support Team, I am glad to answer this question for you!

For MAC version, please use below firmware of BToE. Please download it via below link:
http://sfyms.yealink.com/?ShareToken=B03...B9CA1A0D36

To use the MAC firmware, please use firmware 66.9.0.42 or higher. You can download the latest FW via below link:
http://support.yealink.com/documentFront...mentId=221

Please have a try and let me know the result.

Best Regards,
Evan

(06-01-2018 01:52 AM)Evan_Yealink Wrote: [ -> ]Dear Frans,

​This is Evan from Yealink Support Team, I am glad to answer this question for you!

For MAC version, please use below firmware of BToE. Please download it via below link:
http://sfyms.yealink.com/?ShareToken=B03...B9CA1A0D36

To use the MAC firmware, please use firmware 66.9.0.42 or higher. You can download the latest FW via below link:
http://support.yealink.com/documentFront...mentId=221

Please have a try and let me know the result.

Best Regards,
Evan

Hi Evan,

many thanks for the response, appreciated. Will give it a try and inform shortly.

Thanks again and regards,
Frans

Hi Frans,

Please create a ticket (ticket.yealink.com) if you have any issues or questions in future, our support is 24*5, so it’s convenient for you to get response from our team than wait for some days .

About how to create ticket, please refer to below FAQ:
http://support.yealink.com/faq/faqInfo?id=678

Best Regards,
Evan