Hi all,
I`m using my T46G behind a FritzBox 7490 with the latest FW.
So far so good.
When I would like to forward the call to another number(e.g. mobile), I`m getting always "Line busy"
For the Telekom in Germany I can forward it with "*21*0170000000#
It worked with a previous FW on the Yealink, but I can`t remember what I changed.
Hope you show me the rightway.
Thx
Thomas
(11-10-2017 02:16 PM)tdr01 Wrote: [ -> ]Hi all,
I`m using my T46G behind a FritzBox 7490 with the latest FW.
So far so good.
When I would like to forward the call to another number(e.g. mobile), I`m getting always "Line busy"
For the Telekom in Germany I can forward it with "*21*0170000000#
It worked with a previous FW on the Yealink, but I can`t remember what I changed.
Hope you show me the rightway.
Thx
Thomas
Hi Thomas,
Please check "DTMF Type" is "RFC2833" and "DTMF Payload Type" is "101"
WUI:
Account > AccountX > Advanced
Provisioning:
account.X.dtmf.type = 1
account.X.dtmf.dtmf_payload = 101
Hope this will help.
Hello,
DTMF Type is RFC2833
DTMF Payload 101
But I can`t find the secound settings
Provisioning:
account.X.dtmf.type = 1
account.X.dtmf.dtmf_payload = 101
I have only the point
Settings > Auto Provision
and here I can`t find anything with DTMF.
Can you say me where I can find it?
(11-12-2017 11:34 AM)tdr01 Wrote: [ -> ]Hello,
DTMF Type is RFC2833
DTMF Payload 101
But I can`t find the secound settings
Provisioning:
account.X.dtmf.type = 1
account.X.dtmf.dtmf_payload = 101
I have only the point
Settings > Auto Provision
and here I can`t find anything with DTMF.
Can you say me where I can find it?
Hi,
Sorry I was not clear enough…
You have two options to setup the DTMF settings
1. Manually by Web User Interface
2. Automatically by Provisioning
By provisioning I meant the parameters in the provisioning template…
If you provisioning the phone, you can use these parameters.
You don’t find them in the phones WUI.
Hope this will help.
ok, understood.
I`ve made it in the WUI.
Didn`t work.