Hi,
on the T42G phones I can set call park mode to Transfer via the webif. On the T48G I am not given Transfer as an option, only FAC or XSI. is there some way to get the transfer mode of parking calls on the T48G?
thanks in advance
What is your firmware version on the T48G ?
(11-03-2017 05:29 AM)jasonblewis Wrote: [ -> ]Hi,
on the T42G phones I can set call park mode to Transfer via the webif. On the T48G I am not given Transfer as an option, only FAC or XSI. is there some way to get the transfer mode of parking calls on the T48G?
thanks in advance
Hi,
I think you are running on Broadsoft firmware which the third number is 193, example 35.81.193.1, am I right?
Can I know are you using Broadsoft PBX? If not, you can kindly upgrade to neutral firmware, you can download the firmware in below link:
T48G:
http://download.support.yealink.com/down...2.0.20.rom
Please refer to below FAQ to upgrade the firmware:
http://support.yealink.com/faq/faqInfo?id=9
Any question, please do not hesitate to get in touch with us.