09-26-2017, 05:03 PM
I've set up hundreds of replace rules without issue, but for some reason prefix 110 and 112 do not work. The replace number is never dialed when I dial 110 and 112 with a replace rule in place.
In the screenshotted example below, when I dial 110, the phone dials 110 instead of 81110. Same issue for 112/81112. However, when I dial 111, 81111 is correctly dialed.
I'm running a T46G with the latest firmware (T46-28.82.0.20). I also experience this on a T21p running 34.72.0.76. I've tried setting up the rules via the web UI and RPS mac specifig cfg. Broken in all cases.
![[Image: replacerule.png]](http://soundcurve.com/replacerule.png)
In the screenshotted example below, when I dial 110, the phone dials 110 instead of 81110. Same issue for 112/81112. However, when I dial 111, 81111 is correctly dialed.
I'm running a T46G with the latest firmware (T46-28.82.0.20). I also experience this on a T21p running 34.72.0.76. I've tried setting up the rules via the web UI and RPS mac specifig cfg. Broken in all cases.