09-18-2017, 07:17 AM
09-21-2017, 07:31 AM
(09-18-2017 07:17 AM)VK2XXY Wrote: [ -> ]Will the W52P ever support IPv6?
Edit:
Ok, I see there is a combined W56P/W52P base firmware on the W56P which might do IPv6.
Dear customer,
For your question, The Base for W52P/W56P support ipv6 after V80 version.
Besides, Yealink new product W60B(base) support IPv6 as well, for more information about W60B, please kindly refer below guide:
http://download.support.yealink.com/down...V81_10.pdf
If any question, please feel free to contact us.
Best Regards
Aishion
10-21-2017, 09:54 AM
How about
Description:
It enables or disables the IP phone to obtain IPv6 network settings via SLAAC (Stateless Address Autoconfiguration) method.
CFG Configuration:
static.network.ipv6_icmp_v6.enable
Valid Value:
(0-Disabled;1-Enabled)
Description:
It enables or disables the IP phone to obtain IPv6 network settings via SLAAC (Stateless Address Autoconfiguration) method.
CFG Configuration:
static.network.ipv6_icmp_v6.enable
Valid Value:
(0-Disabled;1-Enabled)
(09-21-2017 07:31 AM)Aishion_Yealink Wrote: [ -> ](09-18-2017 07:17 AM)VK2XXY Wrote: [ -> ]Will the W52P ever support IPv6?
Edit:
Ok, I see there is a combined W56P/W52P base firmware on the W56P which might do IPv6.
Dear customer,
For your question, The Base for W52P/W56P support ipv6 after V80 version.
Besides, Yealink new product W60B(base) support IPv6 as well, for more information about W60B, please kindly refer below guide:
http://download.support.yealink.com/down...V81_10.pdf
If any question, please feel free to contact us.
Best Regards
Aishion