Yealink Forums

Full Version: T46G firmware
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Yealink,
I am having some strange problems on t46Gs firmware 28.81.0.70
BUT when I go to
http://support.yealink.com/documentFront...umentId=10
I see all reference to 28.80.0.70 has disappeared. Also the release notes only go up to .25. For a while I thought I'd imagined that .70 existed.

Has it been withdrawn - should we roll back to .25?

Chris
x.81.0.70 is in use by 3cx in v15.5 which is still in BETA.
I also noticed on that page that x.81.0.25 is above x.81.0.60.
Wouldn't 60 be a newer version than 25?
We have just released a new firmware and upload it to Yealink Website, it is 28.81.0.90, and have deleate the version 28.81.0.70. You do not need to roll back to .25.
Below is the link for the latest firmware:http://download.support.yealink.com/download?path=upload%2Fattachment%2F2017-5-9%2F6%2F7c2b5bcc-c891-4e74-ab6b-a13a5541f83f%2FT46-28.81.0.90.zip

For the version x.81.0.60, it is certificated by 3CX already.
For the other versions, we do not send the version to the 3CX to do the certification, but we have finished the test internally according to the standard certification of 3CX.
X.81.0.60 is above of X.81.0.25, and the X.81.0.90 are above and base on X.81.0.60 and X.81.0.70.

Regards
Lucia
I just updated to 28.81.0.90. But now, in the section "Features/Power-LED" I miss the two options "Power Saving Light Time" and "Power Saving Dark Time", which came with the 28.81.0.71 to solve the ugly bug with the always reasonless flashing led. Please look exactely here:
http://forum.yealink.com/forum/showthrea...3#pid58983
and especially the attachment in this posting of Travis. The last two options are now deleted in the firmware *.90.
Dear,

Yes, we just released the 28.81.0.71 to solve the power LED problem, and we do not add these two options in 28.81.0.90. We will add these features in the next big version in V82.

So if you want to use the two option, suggest to use the firmware 28.81.0.71.
Reference URL's