I am starting to see this with specific extensions at specific install - Yealink phones (so far just T20 and T21p, latest firmwares) are coming un-registered from Asterisk even though the phone thinks it's still connected - under it's status it shows registered, but Asterisk says no.
I am having the problem with 16 phones, and not having it on the other 35 phones at same location.
The re-register time was reduced to 120 seconds.
All the system work in a dedicated vlan (using HP 1910 POE switchs), installed a year ago, and without configuration or hardware changes on recent time.
Thanks in advance.
Raltel
Hi,
Did you reboot the specific phones who are un-registered to Asterisk and after you reduced the re-register time?
Are the phones now registered to Asterisk and how many time does it take till the issue occur again?
(12-29-2016 06:48 PM)complex1 Wrote: [ -> ]Hi,
Did you reboot the specific phones who are un-registered to Asterisk and after you reduced the re-register time?
Are the phones now registered to Asterisk and how many time does it take till the issue occur again?
Hi,
If I reboot the phones, they register ok.
Note: I dont need to reboot, I enter the phone via web and clicking on "Confirm" in the Account tab (without changing any value !!!) I can see the registration in Asterisk CLI.
Reducing the re-register time (tested some values from 3600 to 60) dont solve the problem.
This issue occur with intervals of 2 or 3 days. Always phones of the same group of 16, and not simoultaneusly.
The only difference I find is that these phones have little daily use, but that happens from the first day.
PD: sorry for my english
Hi Sir，
Please share us more information below so that we can locate the problem:
1. when the problem happened, can the phone make or receive a call?
2. Please kindly provide the level 6 syslog, config.bin and pace trace when reproduce the issue.
About how to get the three files, please refer to the FAQ below:
http://support.yealink.com/faq/faqInfo?id=313
it is advised to use a wireshark tool to get the pcap file , for how to download the tool and use it , please refer to the link below :
http://ftp.yealink.com/?ShareToken=B695E...5B045663F2
for the syslog, please export it to server side , before phone reconnect, you can refer to the guide download from below link :
http://=http://ftp.yealink.com/?ShareTok...5B045663F2
3. To make a comparision, please also kindly provide the level 6 syslog, config.bin and pace trace of the phone that can work normally.
Thank you for your info in advanced.
Regards,
Lucia