Yealink Forums

Any T4x phone using firmware version 35.80.0.95

Call flow:
When I place a caller on hold, then press the BLF key for another user the call gets transferred automatically.
What I want to do is place a call on hold, call another user and say "joe is calling for you, can I transfer to you?" they would say either yes or no and based on the answer I could then transfer the call to the other extension. The way it is now I cannot put the call on hold to see if the other user can take the call.
My switch vendor Netsapiens is asking me to
"stop the device from sending a reefer when trying to page. "

Please help
Thanks
Chris

Hi Chris,

Please use the parameter below to do auto provision to solve this issue.
The parameter means when you press the DSS key during a call, it will do the operation that you configure:
transfer.dsskey_deal_type = 1
#0: New Call
#1: Attended Transfer
#2: Blind Transfer

Best Regards,
Lucia Lu

(12-08-2016 10:33 AM)Lucia Wrote: [ -> ]Hi Chris,

Please use the parameter below to do auto provision to solve this issue.
The parameter means when you press the DSS key during a call, it will do the operation that you configure:
transfer.dsskey_deal_type = 1
#0: New Call
#1: Attended Transfer
#2: Blind Transfer

Best Regards,
Lucia Lu

I changed the setting to New Call and that solved the problem
Thanks