11-20-2016, 12:55 PM
I'm trying to auto-provision T46G and T48G phones. They do get their macaddress.boot files from the TFTP server, and do correctly apply all settings, except the personal account settings, which seem to be completely ignored.
For example, a T48G is running firmware 35.81.0.15.
macaddress.boot :
Only the settings from the included "yealink-all.cfg" are applied. The account settings above are not.
The settings which do work are stuff like:
What can I do to make sure the account settings are also applied?
Thanks.
For example, a T48G is running firmware 35.81.0.15.
macaddress.boot :
Code:
#!version:1.0.0.1
account.1.enable = 1
account.1.label = 431-John IP.161
account.1.display_name = 431 John
account.1.user_name = 431
account.1.auth_name = 431
account.1.password = Start
overwrite_mode = 1
# SIP server, time, language, +phonebooks?
include:config "yealink-all.cfg"
Only the settings from the included "yealink-all.cfg" are applied. The account settings above are not.
The settings which do work are stuff like:
Code:
account.1.sip_server.1.address = asterisk.frenetic.lan
account.1.sip_server.2.address = 192.168.44.151
local_time.time_zone = +1
local_time.time_zone_name = None
local_time.dhcp_time = 1
local_time.ntp_server1 = time.frenetic.lan
local_time.ntp_server2 = 0.ch.pool.ntp.org
local_time.interval = 7200
# etc.
What can I do to make sure the account settings are also applied?
Thanks.