Hi I'm relatively new at T46's but I know even less about configuring them for VPN. I have used both the openvpn and the yealink guides with a t46 and t28 model ip phone. I have not been able to successfully connect either of the phones to the vpn. Is there a better guide than the sunnystate guide. I've followed that one too and to no avail. Or is someone able to walk me through what I'm doing wrong?
Thanks V/R
Gradyent
Hi Gradyent,
Have you checked below guide ?
http://support.yealink.com/attachmentDow...29_V71.pdf
and please let us know whether you install the openvpn server, if yes, please make sure the client file for the phone are correct .
if the server is not installed by yourself, please contact your server administrator or you can send use the client file , config.bin file , pcap trace and level 6 syslog for debug.
you can refer to below for how to catch these information.
http://forum.yealink.com/forum/showthread.php?tid=1319
Best Regards!
Flora
The requested information
Hi ,
Thanks for your information, please let us know the details scenario in your side .
After import the vpn file to the phone, the phone won't show the Vpn icon on the screen ,right?
Best Regards!
Flora
Yea, thats right no VPN icon on either display.
My goal is to set it up and have it work.
My scenario:
LAN 192.168.200.0/24 (This is my WAN side of pfSense as well as where the VPN Client phone hostnet)
LAN 192.168.1.0/24 (LAN provided by pfSense and the PBX hostnet)
Tunnel Network for VPN set to 192.168.2.0/24
Do you need anything else about my scenario...?
I haven't heard anything from the thread in a week, I am wondering is anyone still helping me with this. I got the VPN icon to show up on Friday when I disabled all the security options in pfSense, but my phone still did not connect to the Elastix server on the other side of the firewall.