Yealink Forums

I set the date and time on my W52p hit save and when I back out its still the same. Any one can help me out please.

Shawn

(04-08-2015 07:43 AM)shawnmclain Wrote: [ -> ]I set the date and time on my W52p hit save and when I back out its still the same. Any one can help me out please.

Shawn

Dear Shawn,

I think that is because the phone is configured to get time synchronizing from the time server. Please find the attached capture about the configuration page. If I disable the Time Synchronization, I can change time and date to anything I want. But if I enable it, no matter what I change to, the time and date will get synchronized.

Please have a try and let me know the result.

Regards
Elaine

(04-08-2015 03:01 PM)Yealink_Elaine Wrote: [ -> ]

(04-08-2015 07:43 AM)shawnmclain Wrote: [ -> ]I set the date and time on my W52p hit save and when I back out its still the same. Any one can help me out please.

Shawn

Dear Shawn,

I think that is because the phone is configured to get time synchronizing from the time server. Please find the attached capture about the configuration page. If I disable the Time Synchronization, I can change time and date to anything I want. But if I enable it, no matter what I change to, the time and date will get synchronized.

Please have a try and let me know the result.

Regards
Elaine

I went in to all the phone settings and for some reason I can not find Time Synchronization and I did not see a attached capture with your post. Thanks so much

I went in to all the phone settings and for some reason I can not find Time Synchronization and I did not see a attached capture with your post. Thanks so much
[/quote]

HI Shawn,

May I know what is the firmware version of your w52p? If it is not the latest one, would you please upgrade to the latest.
Please note that if the current version is lower than V40(xx.40.xx.xx), please use the USB tool to do upgrade operation

Base: http://www.yealink.com/Upload/W52P/V73/F...3.0.11.zip
Handset: http://www.yealink.com/Upload/W52P/V73/Firmware /26.73.0.11.zip

About how to upgrade:
http://www.yealink.com/Upload/W52P/20131...rmware.zip

Please have a try and let me know the result
Regards
Elaine

Hi,

I have the same issue. Handset Firmware and Base Station Firmware on latest versions.

I have time server as cn.pool.ntp.org, timezone 'GMT' and DST as Automatic.

Time is one hour behind.

Thanks

Dears,

I just had a test with Daylight Saving set to Automatically and found that there is one hour delay. I will have a check with RD for the reason and update to you. Before that, please manually change the value to enable as shown in the screenshot below. This method counts.
Regards
Elaine

Dears,

Good news. This problem has been fixed by new firmware below. Please download and have a test.
ftp://yealinkftp:yealinkftp@ftp.yealink....3.0.30.rom

Regards
Elaine

how can i get Username and password to download:
ftp://yealinkftp:yealinkftp@ftp.yealink....3.0.30.rom

the username / password is in the link.
however, it may have expired by now.

i'd expect any of the newer firmwares to have this fix.
http://support.yealink.com/documentFront...umentId=25

Please upgrade base to latest firmware 25.73.0.40.

http://support.yealink.com/attachmentDow...3.0.40.zip