Hello Team,
Will you please guide me how to disable ring back tone in yealink w52p?
I have selected the region Australia.
But when I select Custom it gives fields to edit but do not know what to write in that fields.
Guide me
Thanks in advance.
Hello Team,
Anyone can reply to the above post,
Thank you
Hi,
I have found this for you:
Customizes the dial tone.
tonelist = element[,element] [,element]…
Where
element = [!]Freq1[+Freq2][+Freq3][+Freq4] /Duration
Freq: the frequency of the tone (ranges from 200 to 7000 Hz).
If it is set to 0Hz, it means the tone is not played. A tone is comprised of at most four different frequencies.
Duration: the duration (in milliseconds) of the dial tone, ranges from 0 to 30000ms.
You can configure at most eight different tones for one condition, and separate them by commas. (e.g., 250/200, 0/1000, 200+300/500, 600+700+800+1000/2000).
If you want the IP phone to play tones once, add an exclamation mark “!” before tones (e.g., !250/200, 0/1000, 200+300/500, 600+700+800+1000/2000).
Hope it help.