I cannot complete a call to a contact in the local directory in my T38 phone. I have tried it as a local number (without an area code) and also with the area code and it just gives me a busy signal and a message that says "Not Found".
Help!
are you using a pbx? local or remote? have you checked the logs on the pbx or run a pcap trace from the phone?
do these calls work if you just dial the number from the directory?
Not sure - we use 3cx with the yealink phone and I know our server and gateway is in-house, but I am not the "tech" person - just help with the system software relating to phone settings and am a contact in-house to relate problems, etc. I just was in the yealink software the other day and was testing the contact section. The entry went fine - uploaded photo, but when I call from my phone by accessing the menu then the directory then local contacts, i get a busy signal and a message saying not found. Does this mean the local directory is only for in-house contacts? Not an outside phone number?
Ok - so 3cx... we too use yealink on 3cx and it works on external contacts.
I usually do not add hyphens - but tried and it worked fine.
The best thing would be to look at the 3cx server logs and see the reason for fail.
You say "Gateway" is in house - so I am assuming PSTN/Analog/T1 lines of some sort..
I went back in took out the hyphens and it worked!