(01-29-2015 07:43 PM)Yealink_James Wrote: [ -> ]Hi,
What's your phone model and phone firmware?
Do you mean that BLF key will light up but their status are wrong? Can you get a pcap trace to check what NOTIFY message server return? Since the BLF key status depends on the NOTIFY message from server.
Regards,
James
The IP phone is Yealink T 28:
Firmware Version 2.73.0.40
Hardware Version 1.0.0.4
We are using kamailio 1.4.x
When you first boot the phone none of the lights on the side buttons lights up. When you press them though, they dial the intended extension but the light status is all over the place like a Xmas tree and stay that way for half a day or so and some reset to green and some dont.
Also this is the configuration of the side buttons:
memorykey.1.line = 1
memorykey.1.value = park+71
memorykey.1.type = 16
memorykey.1.pickup_value = %NULL%
memorykey.1.xml_phonebook = 0
memorykey.2.line = 1
memorykey.2.value = park+72
memorykey.2.type = 16
memorykey.2.pickup_value = %NULL%
memorykey.2.xml_phonebook = 0
memorykey.3.line = 1
memorykey.3.value = park+73
memorykey.3.type = 16
memorykey.3.pickup_value = %NULL%
memorykey.3.xml_phonebook = 0
memorykey.4.line = 1
memorykey.4.value = 700
memorykey.4.type = 3
memorykey.4.pickup_value = %NULL%
memorykey.4.xml_phonebook = 0
memorykey.5.line = 1
memorykey.5.value = 201
memorykey.5.type = 16
memorykey.5.pickup_value = 201
memorykey.5.xml_phonebook = 0
memorykey.6.line = 1
memorykey.6.value = 203
memorykey.6.type = 16
memorykey.6.pickup_value = 203
memorykey.6.xml_phonebook = %NULL%
memorykey.7.line = 1
memorykey.7.value = 205
memorykey.7.type = 16
memorykey.7.pickup_value = 205
memorykey.7.xml_phonebook = %NULL%
memorykey.8.line = 1
memorykey.8.value = 201
memorykey.8.type = 16
memorykey.8.pickup_value = 201
memorykey.8.xml_phonebook = %NULL%
memorykey.9.line = 1
memorykey.9.value = 107
memorykey.9.type = 16
memorykey.9.pickup_value = 107
memorykey.9.xml_phonebook = %NULL%
memorykey.10.line = 1
memorykey.10.value = *80
memorykey.10.type = 0
memorykey.10.pickup_value = %NULL%
memorykey.10.xml_phonebook = 0
The BLF settings for buttons 5-9 are the ones I am concerned about.