hello,
has anyone configer a working vpn with a t46g and pfsense,
i have read all out over the internet and used this guide
http://www.sunstatetechnology.com/docs/Y...NGuide.pdf
but with no luck.
i have tested the vpn server with my mobile phone and that works fine.
i also changed the file names from Client1 to Client en repacked the tar with 7 zip.
i hope anybody can helps me
Tanks a lot
Hi,
Have you read our OpenVPN guide? If not, please have a view firstly.
http://www.yealink.com/Upload/T2X/201311...Phones.pdf
If it still doesn't work. Can you export vpn.tar file to us for a check? You can mask private information.
And please get a level 6 syslog by follow step:
1. Import your tar file to phone.
2. Go to setting-> configuration, set the syslog level to 6.
3. Phone will automatically reboot. After rebooting export the syslog to us.
Regards,
James
(01-12-2015 11:20 AM)Yealink_James Wrote: [ -> ]Hi,
Have you read our OpenVPN guide? If not, please have a view firstly.
http://www.yealink.com/Upload/T2X/201311...Phones.pdf
If it still doesn't work. Can you export vpn.tar file to us for a check? You can mask private information.
And please get a level 6 syslog by follow step:
1. Import your tar file to phone.
2. Go to setting-> configuration, set the syslog level to 6.
3. Phone will automatically reboot. After rebooting export the syslog to us.
Regards,
James
I'm having the same issue, and have read both the OP's document and the Yealink docs. As the OP, I can connect with on my cell (android) and register with a sip client such as Bria. OpenVPN server versions is 2.3.6
Attached vpn conf, server conf, and syslog
Did you resolve the issue?
Because i have also problems with this.