the URI request :
http://ipadress/cgi-bin/ConfigManApp.com?number=
no more works with latest firmware 7.70.0.130
also request as :
http://ipadress/cgi-bin/ConfigManApp.com?key=
don't
no error is returned
but nothing happens, on phone and web Gui
after downgrading back to 7.61.0.80
it works again
firmware seems not to be tested in depth
best regards
Henri
(03-27-2013 11:26 AM)Yealink Support Wrote: [ -> ]Hello Henri,
To make the phone more security, in V70 firmware, we improved the Action URI feature, and the format is different:
http://10.2.4.239/cgi-bin/ConfigManApp.com?key=
And you still need to set the Trusted Action URI Server List in the webpage-Phone-Features-API Security,
If you allow any control, you can type any in the Trusted Action URI Server List.
For more details, you can refer to our admin guide(download from our website):
http://www.yealink.com/Upload/Version/T2...e_V2.1.pdf
Thanks for the info, that is new with this firmware, i have to deeper check-out the relase notes ...
but know i'm facing a new issue with the call release
when sending out :
http://10.2.4.239/cgi-bin/ConfigManApp.com?key=CALLEND
the call is well released but the screen and entire phone "freezes"
a line key has to be pressed
or
http://10.2.4.239/cgi-bin/ConfigManApp.com?key=L1
has to be send , to recover normal function
Note : it's important for us to overcome this issue
as our customers are using a software we have developped
which is managing the phone
Hello,
Sorry for this, i reproduced this issue at my side, i will submit to our engineer to check this issue ASAP.
Do you have any deadline for this?
(03-28-2013 04:53 PM)Yealink Support Wrote: [ -> ]Hello,
Sorry for this, i reproduced this issue at my side, i will submit to our engineer to check this issue ASAP.
Do you have any deadline for this?
Thanks for your trial and feedback
we have downgraded the firmware to V61 on last installed phones
so we can wait, this bug to be fixed before upgrading again to V70
best regards
Henri
Thanks for your confirmation.
