Yealink Forums

Full Version: Speed dial Key
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
I have noticed that the speed dial key allows transfer. Everything I read says that it shouldn't. Is there a different key I should be using instead of speaddial to only dial the number not transfer to it?
I got your mail, don't worry.
You may set up the transfer mode to the blind transfer.
To solve this issue you can via the web.
Here is the path :feature->transfer->Transfer Mode Via Dsskey
Set up as the following that the speed dial will only to dial the number.
Hope this helps!
[Image: attachment.php?aid=1000]
Thanks for that Jim that fixed it. My last question is can you tell me what the function is in the provisioning guide? There are a couple and I'm not exactly sure which one it is.
Given below is the configuration parameters:

##It configures the DSS key behavior during an active call when user presses the DSS
##key and the DSS key is configured as a speed dial, transfer or BLF/BLF list key.
##0-New Call,1-Attended Transfer,2-Blind Transfer.
##The default value is 2.
transfer.dsskey_deal_type = 0

Hope this helps!
Thanks for this Jim. This is great.
Reference URL's