09-01-2016, 02:25 AM
I have a T48G and I have setup an OpenVPN server using TAP. My device will connect (I see a white VPN symbol) however I do not see a TAP adapter (thus no IP) in my device log. When I use TUN, I am able to see an adapter with IP. Note: I tested with a Windows box and will confirm my server has been setup properly.
My WAN IP is 192.168.0.133 and I'm connecting to 192.168.0.190 (test environment for those who notice both are a 'local' addresses). I expect a 10.x.x.x address on my remote network.
Why is my phone not getting an IP (or why do I not see an IP)?
Here is part of my log:
My WAN IP is 192.168.0.133 and I'm connecting to 192.168.0.190 (test environment for those who notice both are a 'local' addresses). I expect a 10.x.x.x address on my remote network.
Why is my phone not getting an IP (or why do I not see an IP)?
Here is part of my log:
Code:
Aug 31 18:00:03 openvpn[748]: [pfsense] Peer Connection Initiated with 192.168.0.133:1194
Aug 31 18:00:05 openvpn[748]: TUN/TAP device tap0 opened
Aug 31 18:00:05 openvpn[748]: NOTE: unable to redirect default gateway -- VPN gateway parameter (--route-gateway or --ifconfig) is missing
Aug 31 18:00:05 openvpn[748]: Initialization Sequence Completed
Aug 31 18:00:05 openvpn[748]: Link success --init.c, 1138----
eth0 Link encap:Ethernet HWaddr 00:15:65:9C:68:6C
inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::215:65ff:fe9c:686c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5355 errors:0 dropped:0 overruns:0 frame:0
TX packets:283 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1024
RX bytes:1061157 (1.0 MiB) TX bytes:149980 (146.4 KiB)
Interrupt:8
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
PID USER VSZ STAT COMMAND
1 root 2064 S init
2 root 0 SW< [kthreadd]
3 root 0 SW< [ksoftirqd/0]