Yealink Forums

Full Version: Testing SIPTAPI
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hello,
We are testing SIPTAPI (from ipcom.at) with Yealinkt28 phone.

We have seen two problems -
1.ring back tone was not played for around 40 to 50 seconds.
2.After the call was connected, there was no voice at all from both sides.

I attached the log from yealink and also wireshark trace for this call.

Can you please check and help us what is going wrong?

regs
Intellinet support.
(07-23-2014 08:19 PM)IntellinetSupport Wrote: [ -> ]Hello,
We are testing SIPTAPI (from ipcom.at) with Yealinkt28 phone.

We have seen two problems -
1.ring back tone was not played for around 40 to 50 seconds.
2.After the call was connected, there was no voice at all from both sides.

I attached the log from yealink and also wireshark trace for this call.

Can you please check and help us what is going wrong?

regs
Intellinet support.

Hello,
Anyone's help is highly appreciated.

regs
IntellinetSupport.
Hey IntellinetSupport

Did you ever get anywhere on this? I am actually looking at possibly testing the same TAPI driver out and seeing if i can make it function. Just curious if you ever did.

Walter

Dear Tsurkraw,
I'm using SIPTAPI (from ipcom.at) v.0.2.15 on my T26 ,
since six month , and it works well. No voice problem I'm observing.
Attention only the V73 works well.

Please could you show a screen shot of your SIPTAPI option configuration (Win. controll pannel >> Modem option)?

Bye
Walter
(03-20-2015 11:29 PM)Walter Wrote: [ -> ]Dear Tsurkraw,
I'm using SIPTAPI (from ipcom.at) v.0.2.15 on my T26 ,
since six month , and it works well.
WOW!

How do you make it?
What are your settings in Siptapi + in the T26?
Huh

Walter

Nothing have to do into T26.
Mandatory is using the Firmware V73 (6.73.0.40).

Bye.
Walter

See the attachment
Walter
Hi Walter,

thank you for your answer, last question - what PBX do you use?
(Siptapi doesn't work with my AVM-FritzBox Sad ).

Bye

Bernd

Walter

Hi Ike,
I'm using CommunigatePro
https://www.communigate.com/

Bye
Walter
Thanks Walter, this made it work!
Reference URL's