(01-24-2013 04:02 PM)stash Wrote: [ -> ]Hi,
Can someone give me guide on what to type in the XML template of 3CX to achieve distinctive ring tone per ring group or per call queue.
Thanks,
STASH
Hi,
you can download the document about how to use Distinctive Ringtone for your reference. , hope it can help
http://www.yealink.com/Upload/document/H...446272.pdf
And below is the message of the packet.
INVITE sip:304@10.2.9.75:5062 SIP/2.0
Via: SIP/2.0/UDP 10.2.9.6:5000; branch=12345678999
Call-ID: ae261add1da05937d9b40ef0b137ba6e@ats9900
From: <tel:83003002;phone-context=+8610>;tag=7e44d086-CC-51-TRC-13380
To: <sip:3033@10.1.0.38>
CSeq: 1 INVITE
Allow: INVITE,MESSAGE,INFO,PRACK,PUBLISH,SUBSCRIBE,OPTIONS,UPDATE,BYE,CANCEL,NOTIFY,ACK,REFER
Contact: <sip:conf=6115@58.60.106.105:5060>
Max-Forwards: 68
Supported: 100rel,precondition
Session-Expires: 1000
Min-SE: 1000
P-Called-Party-ID: <sip:861082002004@hw.cm.com>
P-Asserted-Identity: <sip:861083003002@hw.cm.com>,<tel:+86-10-83003002>
Content-Length: 205
Content-Type: application/sdp
Alert-Info:http://10.2.4.164:8080/xi.wav;info=tony;x-line-id=0
v=0
o=861083003002 2208988800 0 IN IP4 10.10.10.101
s=TOMORROW
c=IN IP4 10.10.10.101
t=3426895489 0
m=audio 15874 RTP/AVP 18 101
a=rtpmap:18 G729/8000
a=rtpmap:101 telephone-event/8000
a=sendrecv
let me know if any misunderstanding.
Best Regards!
Yealink Support Team