Yealink Forums

Does anybody have a working config they wouldn't mind sharing that has Yealink PHones working with a Cisco SG300 switch using a voice vlan? I can't get my W52P phone to grap a correct WAN IP. I'm looking for the Cisco SG300 config.

Thanks in advance.

Can you configure Cisco SG300 with other phones successfully?
I think you can go to Cisco Forum. Anyway, i hope other forum member can help you.

I was able to get the T42G phones to work but had to switch the phones firmware from the broadsoft version to 29.72.0.25. When I changed the firmware version it changed the LLDP capabilities from "Router and Telephone" to "Bridge and Telephone". The W52P's the LLDP capabilities are "Router and Telephone", I have tried different firmware on the W52P but everything stays the same. We use an another phone manufacturer and all of there models work but the LLDP capabilities are just "Telephone".

(05-17-2014 09:42 AM)Yealink Support Wrote: [ -> ]Can you configure Cisco SG300 with other phones successfully?
I think you can go to Cisco Forum. Anyway, i hope other forum member can help you.

Do your Cisco SG300 send the VLAN VID by LLDP?
I hope you can send the syslog level 6, config.bin and pcap to [eamil]support.usa@yealink.com[/email].
How to Get the Correct Syslog, Config.bin and Trace

Hi,

You might want to check out a company called Tenfold. They're a CTI solution that offers integration to over 150 phone systems and CRM applications. You can sign up for a free trial and request for a demo on the link below.

https://www.tenfold.com/integrations/yealink/

(07-07-2016 05:33 PM)jmoore Wrote: [ -> ]Hi,

You might want to check out a company called Tenfold. They're a CTI solution that offers integration to over 150 phone systems and CRM applications. You can sign up for a free trial and request for a demo on the link below.

https://www.tenfold.com/integrations/yealink/

SPAM!!!!!