Hi
I have the exact same issue and have tried all the different firmware in the hand set, (26.40.0.26) and the latest (26.50.0.20) both show battery in the red all the time and discharge very fast, the firmware (26.30.0.50, and 26.30.0.40) both hold battery charge great but wifi signal drops more frequently..
Your firmware needs updating to fix these issues please
Hi all,
Can you send me the SN number of your base along with the issued numbers of handsets?
Support,
In same situation as Charliestott. I have downgraded firmware to 26.30.0.50 (from 26.40.0.15) to resolve battery issue but now getting "out of range" when paging.
Any ideas?
thanks.
Hi bsanders,
Sorry. Please send the SN number to me then we will check inside.
Support,
I have send you this info on Friday. This is causing a lot of problems for us. Please let me know what the next steps are.
thanks
Dear Support,
I have the same situation with our customer.
The S/N are:
1301213122401750 Yealink W52P
1301313052400380 Yealink W52H
FW vers 25.50.0.25/26.50.0.20
and
1301213122401765 Yealink W52P
1301313052400401 Yealink W52H
1301313052401560 Yealink W52H
FW Vers 25.40.0.16/26.40.0.16
Regards
Walter
Hi Walter,
Could you downgrade one handset firmware version to
26.30.0.40 and test again?
Please download the firmware.
26.30.0.40
If on this version firmware hold battery charge great, please tell us
1. Your location
2. Where and who did yu buy the phones from?
thanks
I am having exactly the same issue and have downgraded the handsets to 26.30.0.50. Handsets went from having less than 12 hours of standby time, to having 3+ days (or more) of standby time. It was a very clear improvement.
Dear belias,
Support suggested FW 26.30.0.40 but this FW had embedded "Coverage warning tone ON".
For me is very important have "Coverage warning tone OFF".
26.30.0.50 has "Coverage warning tone OFF" too.
So, could you confirm me your running FW is 26.30.0.50 now , and you have solved the Handset low battery problem?
Thank you
Walter