Yealink Forums

Full Version: calledDevice at Groupcalls with uacsta
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Dear Support,

i have a problem in the following enviroment with uaCSTA:
* T46G (28.80.98.2 (Beta))
* nfon
* uaCSTA enabled

Incomming Call on a Groupnumber "0" with many group members.
In the delivered and established Event the calledDevice is the phone that is alerting.
In my opinion it should be the Groupnumber "0".
Here is one example:
<DeliveredEvent xmlns="http://www.ecma-international.org/standards/ecma-323/csta/ed5">
<monitorCrossRefID>2</monitorCrossRefID>
<connection>
<callID>32780</callID>
<deviceID>sip:Kxxxxx7@109.68.96.128:5060;phone=AABBCCDDEEFF;ext=4</deviceID>
</connection>
<alertingDevice>
<deviceIdentifier>sip:Kxxxxx7@109.68.96.128:5060;phone=AABBCCDDEEFF;ext=4</deviceIdentifier>
</alertingDevice>
<callingDevice>
<deviceIdentifier>sip:#00123456777@109.68.96.128</deviceIdentifier>
</callingDevice>
<calledDevice>
<deviceIdentifier>sip:Kxxxxx7@109.68.96.128:5060;phone=AABBCCDDEEFF;ext=4</deviceIdentifier>
</calledDevice>
<lastRedirectionDevice>
<notKnown />
</lastRedirectionDevice>
<localConnectionInfo>alerting</localConnectionInfo>
<cause>normal</cause>
</DeliveredEvent>

Here as example the delivered Event by a snom phone:
<DeliveredEvent xmlns="http://www.ecma-international.org/standards/ecma-323/csta/ed5">
<monitorCrossRefID>6</monitorCrossRefID>
<connection>
<callID>-21</callID>
<deviceID>sip:KXXXXXD@109.68.96.128:6050;phone=AABBCCDDEE00;ext=2</deviceID>
</connection>
<alertingDevice>
<deviceIdentifier>sip:KXXXXXD@109.68.96.128:6050;phone=AABBCCDDEE00;ext=2</deviceIdentifier>
</alertingDevice>
<callingDevice>
<deviceIdentifier>sip:#00123456777@109.68.96.128</deviceIdentifier>
</callingDevice>
<calledDevice>
<deviceIdentifier>sip:+4912345670@109.68.96.128</deviceIdentifier>
</calledDevice>
<lastRedirectionDevice>
<notKnown/>
</lastRedirectionDevice>
<localConnectionInfo>alerting</localConnectionInfo>
<cause>normal</cause>
</DeliveredEvent>

Thank you for your answer.

Regards
Matthias
thanks for your information

our technical specialist who is responsible for Nfon will connect with you through email to help solving this issue !

TKS & BR

Michael
Thank you for your message.

When will your technical specialist get in contact with me? I have not recieved any e-mail from him.

Best Regards
We still wait for an answer.....
such prices may help, but unfortunately I do not understand much about this error Sad
Reference URL's