Need to make microphone gain adjustable with web config for the T46g and T48g. This feature was omitted for some reason in these phones and I would like the microphone gains of the handset, headset, and speakerphone to be adjustable. The feature requested already exists in the T38G and why it was removed in the T46 and T48 is beyond me but that is an important feature to even a basic end user, especially a teleworker such as myself. Please I beg of you, Please add the feature back in.
Since your in the firmware getting dirty I notice the top end handset output volume is a bit low is not horrible but could use a 15 percent boost so the loudest is louder, as some callers can be a bit low.
Do you mean that you want to able to send volume options in webpage?
Yes I do. make the microphone gain (sensitivity) adjustable in the web config page of phone for the handset, headset, and speakerphone. So to clarify add adjustable send volume for handset, headset and speakerphone.
BTW I have a T46G and a T48G and this feature is missing from both and would like it added to both of them, Thanks!
(03-11-2014 08:11 PM)Yealink Support Wrote: [ -> ]Do you mean that you want to able to send volume options in webpage?
Hi jayw654,
Our product department consider the voice quality that will be affected by this sending volume settings. And we do encounter some kind of similar issues that affect voice quality by adjusting this volume.
So they decide to delete this sending volume settings in webpage.
Hope you can be kindly understanding.
Could they at least bump it up a couple notches?
(03-13-2014 11:41 AM)Yealink Support Wrote: [ -> ]Hi jayw654,
Our product department consider the voice quality that will be affected by this sending volume settings. And we do encounter some kind of similar issues that affect voice quality by adjusting this volume.
So they decide to delete this sending volume settings in webpage.
Hope you can be kindly understanding.
Yes. We will consider to increase the volume.
I tried the solution with an old topics ( Microphone gain - T46G ) but no solution
I have an installation with 20 Yealink T41 and T46 with Yeastar + ISDN
I do not know how to solve - low microphone volume
updated the firmware please
thanks
Hi, i have re-sended this request to our product department.
Hi all,
Can you check to speak directly to the MIC and test again? Does the voice sound better and louder?
I agree , Just found the forum this is my 1st post .
We are a small company but use Yealink phones . through out 60 or so users
Most are T28's but now with some t46's
I need to adjust the Mic volume/sensitivity as too many comments that we are difficult to hear
to quite