Yealink Forums

Using T46G behind Broadsoft firmware version 28.71.193.8. I am looking for the configuration file that will allow me to choose a time zone so the phone will display the correct time. Currently this is only available via the GUI. Time zone defaults to -11 Samoa. This is my current configuration:

#Configure the domain name or the IP address of the NTP server. The default value is cn.pool.ntp.org.
local_time.ntp_server1 = %SNTP_SERVER_1%
local_time.ntp_server2 = %SNTP_SERVER_2%

#Configure the update interval (in seconds) when using the NTP server. The default value is 1000.
local_time.interval =

#Configure the daylight saving time feature; 0-Disabled, 1-Enabled, 2-Automatic (default);
local_time.summer_time = 2

#Configure the DST type when the DST feature is enabled; 0-By Date (default), 1-By Week;
local_time.dst_time_type =

#Configure the start time of DST. The default value is 1/1/0.
#If the DST type is configured as By Date, the value format is Month/Day/Hour. For example, the value 5/20/10 means the start time is at 10:00 on May 20.
#If the DST type is configured as By Week, the value format is Month/Day of Week/Day of Week Last in Month/Hour of Day.
#For example, the value 1/4/2/5 means the start time is at 5 o'clock on Tuesday of the 4th week in January.
local_time.start_time =

#Configure the end time of DST. The default value is 12/31/23. The value format is the same to the start time.
local_time.end_time =

#Configure the offset time (in minutes). It ranges from -300 to 300, the default value is 60.
local_time.offset_time =

#Configure the time format; 0-12 Hour, 1-24 Hour (default);
local_time.time_format = 0-12 Hour

#Configure the date format; 0-WWW MMM DD (default), 1-DD-MMM-YY, 2-YYYY-MM-DD, 3-DD/MM/YYYY, 4-MM/DD/YY, 5-DD MMM YYYY, 6-WWW DD MMM;
local_time.date_format =

#Enable or disable the DHCP Time; 0-Disabled (default), 1-Enabled;
local_time.dhcp_time =

local_time.manual_time_enable = 0



Thank you

You can configure in MAC.cfg file with below syntaxs.
----------------------------------------------------------------
#!version:1.0.0.1
################################################################################​#######
## Time ##
################################################################################​#######
#Configure the time zone and time zone name. The time zone ranges from -11 to +12, the default value is +8.
#local_time.time_zone = +8
#local_time.time_zone_name = China(Beijing)
local_time.time_zone =
local_time.time_zone_name =

----------------------------------------------------------------
You can refer to more details in admin guide of T4X.
Yealink_SIP-T4X_IP_Phone_Family_Administrator_Guide_V72_1