Has there been any resolve to this? We are having what appears to be the same issue (except with Yealink T27G phones). I have tried FW versions 69.81.0.110 and, I believe, 69.81.0.25. Both of these version result in a response of error 23 from the radius server. This exact same configuration works fine with T28P w/ FW 2.73.0.40. There are not very many FW's available for the T27G phone and I am guessing all of the releases from 69.81.x.x will have this problem.
Any updates with this is welcomed.
Thanks,
Joe
Has there been any resolve to this?
We are having what appears to be the same issue (except with Yealink T27G phones). I have tried FW versions 69.81.0.110 and, I believe, 69.81.0.25. Both of these version result in a response of error 23 from the radius server. This exact same configuration works fine with T28P w/ FW 2.73.0.40. There are not very many FW's available for the T27G phone and I am guessing all of the releases from 69.81.x.x will have this problem.
Any updates with this is welcomed.
Regards,
Joe
Hi Folks,
any news to this incident wit xx.81.xx.xx firmware not supporting EAP-PEAP/MSCHAPv2 with Microsoft NPS anymore? (SCHANNEL code 46)
We got a x-hunderd T46G phones in the field and need to be able to switch to v81 Firmware for the correct use of 3CX 15.5
Is there a chance anyone could provide me the T46-28.81.0.78 at least, to check if it will work in our environment as mentioned by BigMac?
Thanks a lot.