Yealink Forums

It has multicast reception, There's no Multicast page option in the Type field for DSS Key programming

Try

DSS Key x
Type: Paging
Value: [IP]:[Port] //Listening Adress of MulticastIP

Yes I agree. I have several T-28's and the last update has a BLF level feature.. One of the complaints I have received from color blind customers using Asterisk was BLF lights was always on. They could not tell the red form green. I hope they add this feature to the T-38's.

(09-01-2014 04:16 PM)Greysi Wrote: [ -> ]Try

DSS Key x
Type: Paging
Value: [IP]:[Port] //Listening Adress of MulticastIP

Nope, It tries to dial the string.

Call from '7554' (192.168.8.88:1062) to extension '224.0.2.60:50010' rejected because extension not found

Paging isn't Multicast Paging.

Phone: Yealink T38G
FW: 38.70.0.221

Web-Site of Phone:

Contacts\MulitcastIP
Paging Barge : Disabled
Paging Priority Active: Enabled
IP Adress: 244.0.0.32:10111

DSS Key\Line Key
Line Key4
Type: Paging
Value: 244.0.0.32:10111
Label: Test


I test it in this second and it's working (for me).

Greysi,

Do you have this working on a Voice VLAN on the Internet Port and a Data VLAN on the PC Port? I believe that is where Multicast Paging stops working.

Thanks for your response.

(09-11-2014 06:31 PM)Greysi Wrote: [ -> ]Phone: Yealink T38G
FW: 38.70.0.221

Web-Site of Phone:

Contacts\MulitcastIP
Paging Barge : Disabled
Paging Priority Active: Enabled
IP Adress: 244.0.0.32:10111

DSS Key\Line Key
Line Key4
Type: Paging
Value: 244.0.0.32:10111
Label: Test


I test it in this second and it's working (for me).

It's working. Of course only for voice-vlan 26.

phone settings:

Network\advanced\VLAN\
Internet Port: Active: Enabled
VID: 26
Pc Port: Active: Disabled


pc settings:

only dhcp (no vlan configurations)


the cisco-switch config:

interface FastEthernet1/0/4
description *** PCs and PHONES ***
switchport access vlan 13
switchport mode access
switchport voice vlan 26
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
mls qos trust cos
auto qos voip trust
spanning-tree portfast

It has multicast reception, There's no Multicast page option in the Type field for DSS Key programming

Right. On later firmwares, i.e. the ones my most recently received units shipped with, there is a 'Paging' type in the menu, but no way to configure the listening address (the multicast submenu under contacts is missing).

Older firmwares with the multicast patch (38.70.0.172) have the multicast submenu under the contacts tab, but there's no way to select the paging type when cofiguring a line or memory key. Maybe it can be done via a provisioning file, but it's not there in the web interface.

Currently the only correctly configured phone I have was an accident: I programmed the line key on the newer firmware before realizing I had to downgrade to .172 to set the listening address. The line key programming was retained.

This is embarrassingly shoddy QA and this will probably be my last Yealink deployment if this is the level of competence and support that we can expect.

Can anyone specify a T38g firmware load that has BOTH the ability to configure a multicast paging key and the multicast listening address from the web UI?

the most current firmware that works with multicast 38.70.1.26

I upgraded a test unit to 38.70.1.26 .... there's still no option to setup a Paging or Multicast Paging key.

See attached images.

[attachment=1163]

[attachment=1164]

---

Alright, now the options are showing up in Chrome but not in Firefox. Tell me that isn't weird!

[attachment=1165]

Will test with this 70.1.26 version and hopefully I can standardize on that so long as whatever 3CX specific tweaks it contains aren't a problem when used w/Elastix (Asterisk/FreePBX).