Hello,
we got T48G on reception desk. We need to lock those Phones when noone is present. How to do this with T48G? According to the Manual "Phone Lock" is not applicable to T48G Phones?!?
Any Ideas for this?
Thx
Andreas Schnederle-Wagner
Hi
For your question,T48 support "phone lock" feature,you can configure this feature via web UI or phone user interface:
phone user interface:
1. Tap menu->Advanced (default password: admin) ->Phone Lock.
2. Tap the gray box of the Lock Enable field.
3. Tap Disabled from the pull-down list to disable this feature
web UI: features>>phone lock
for more information,you can refer to T48 user guideļ¼
link:http://support.yealink.com/attachmentDownload/download?path=upload%2Fattachment%2F2015-7-13%2F3%2F6bd9fc5e-f6fc-4272-9de8-7a60f570e219%2FYealink_SIP-T48G_User_Guide_V80_60.pdf
TKS&BR
klaus
ok we got Firmware 35.75.0.50 - possible Phone Lock is not supported on T48G on this Firmware Level?!? (according to Manual)
If I upgrade Firmware to 80.60 - is there anything to pay attention for? (T48G all attached to 3CX V14SP2)
Andreas