Yealink Forums

Hi,

I have a T48G with an EXP40 module.

Everything works well, I can configure the module via web interface.

My question is, is it possible to download the .cfg file of the EXP40 module ?

If I download the cfg file from the T48G, the part for DSS KEY, in the file, stops at 29 (only the DSSKEY of the T48G).

Thanks in advance.

Best regards.

I have the same problem today with my new EXP40. I think it's a bug, i have the following workaround:

1. Add the following line at the end of the configuration file (after export):
expansion_module.1.key.1.type = 13 //for Speed-Dial
expansion_module.1.key.1.line = 1 //SIP Account
expansion_module.1.key.1.value = 00493012134546 //Phonenumber
expansion_module.1.key.1.label = CompanyName
expansion_module.1.key.2.type = etc.
expansion_module.1.key.2.line = etc.
expansion_module.1.key.2.value = etc.
expansion_module.1.key.2.label = etc.
2. Import the config file = voila!

(12-15-2015 10:44 PM)Fabio_ccom Wrote: [ -> ]Hi,

I have a T48G with an EXP40 module.

Everything works well, I can configure the module via web interface.

My question is, is it possible to download the .cfg file of the EXP40 module ?

If I download the cfg file from the T48G, the part for DSS KEY, in the file, stops at 29 (only the DSSKEY of the T48G).

Thanks in advance.

Best regards.