Hi,
I have a faulty W52P base station.
I've tried the recovery method described here at the forum.
However, upon booting, it only downloads W5X.bin and W5X.rfs, not W52P.rom.
I've waited far more than 5 minutes, rebooted and still nothing, only power LED is on.
Am I missing something?
Thanks.
(11-19-2015 10:52 AM)Yealink_Karl Wrote: [ -> ]Hi,
You can download the firmware from the link below, but please rename it to W52P.rom.
Link: http://support.yealink.com/attachmentDow...3.0.40.zip
I had that file. Like I've said, on tftpd I can see that base station downloads .bin and .rfs file but not .rom
In simple terms, the base station doesn't even "ask" for the W52P.rom file.
Hi,
I will send you privite message, please download the new bin and rfs files and test again.
(11-20-2015 09:07 AM)Yealink_Karl Wrote: [ -> ]Hi,
I will send you privite message, please download the new bin and rfs files and test again.
Nothing yet. Here's my log:
Code:
Connection received from 192.168.0.100 on port 1142 [20/11 22:07:20.605]
Read request for file <W5X.bin>. Mode octet [20/11 22:07:20.621]
OACK: <timeout=5,blksize=1468,> [20/11 22:07:20.621]
Using local port 55383 [20/11 22:07:20.621]
<W5X.bin>: sent 1032 blks, 1514044 bytes in 1 s. 0 blk resent [20/11 22:07:21.276]
Connection received from 192.168.0.100 on port 1927 [20/11 22:07:21.401]
Read request for file <W5X.rfs>. Mode octet [20/11 22:07:21.401]
OACK: <timeout=5,blksize=1468,> [20/11 22:07:21.401]
Using local port 62489 [20/11 22:07:21.401]
<W5X.rfs>: sent 5715 blks, 8388608 bytes in 4 s. 0 blk resent [20/11 22:07:25.088]
It just ends here, no attempt to get W52P.rom file
Thanks
UPDATE:
After a few more tries, it asks for W52P.rom but, can't upload it
Code:
Connection received from 192.168.0.100 on port 1142 [20/11 22:18:33.336]
Read request for file <W5X.bin>. Mode octet [20/11 22:18:33.336]
OACK: <timeout=5,blksize=1468,> [20/11 22:18:33.336]
Using local port 64651 [20/11 22:18:33.336]
<W5X.bin>: sent 1032 blks, 1514044 bytes in 1 s. 0 blk resent [20/11 22:18:34.007]
Connection received from 192.168.0.100 on port 1948 [20/11 22:18:34.132]
Read request for file <W5X.rfs>. Mode octet [20/11 22:18:34.132]
OACK: <timeout=5,blksize=1468,> [20/11 22:18:34.132]
Using local port 64652 [20/11 22:18:34.132]
<W5X.rfs>: sent 5715 blks, 8388608 bytes in 3 s. 0 blk resent [20/11 22:18:37.860]
Connection received from 192.168.0.100 on port 41914 [20/11 22:18:44.324]
Read request for file <W52P.rom>. Mode octet [20/11 22:18:44.324]
Using local port 64653 [20/11 22:18:44.324]
TIMEOUT waiting for Ack block #1013 [20/11 22:21:53.079]
Hi,
I think the phone maybe have a hardware problem, would you please contact with your vender for replace if the phone in warranty.