Yealink Forums

I have about 60 T46G's that will all have standard BLF's to begin with. What's going to be the best and easiest way for me to configure these 60 phones? I know that i can import the local config file, but is there a way to automatically do it?

hi

you can do this easily through the auto provision feature , for more information , please refer to the guide download from below link :

http://support.yealink.com/attachmentDow...V80_60.pdf

TKS & BR

Michael

What PBX are you running?
A lot of them say for example FreePBX or 3CX have templates built into them that you can setup the button layout in. YOu modify the template and they the phones auto download the templates.

If you can let us know what system you are running might be able to help you get that going.

We are using 3CX. Thank you for your help.

(11-09-2015 11:27 AM)tsukraw Wrote: [ -> ]What PBX are you running?
A lot of them say for example FreePBX or 3CX have templates built into them that you can setup the button layout in. YOu modify the template and they the phones auto download the templates.

If you can let us know what system you are running might be able to help you get that going.

Shoot me a private message with your email address.
Id gladly catch up with you in a evening if you want a 30min lesson on modifying the template.

Will make your life much easier. Will also give you a few other pointers in the template with 3CX that will make it work a tad bit better

If interested.

Thanks